
products
產品分類產品中心/ products

產品型號:BAA500
更新時間:2026-03-12簡要描述:BEAK BAA500線性功率放大器,BAA500功率放大器專為控制zui 大 500 VA 的振動測試系統而開發。RMS 輸出功率是在 4.0 歐姆的負載阻抗和 500 VA 正弦輸出功率下計算的。BEAK 線性功率放大器
| 品牌 | 其他品牌 |
|---|
BEAK BAA500線性功率放大器,BAA500功率放大器,BEAK 線性功率放大器詳細介紹:

| 連續正弦輸出功率 | 500 伏安 |
| 頻率范圍 小信號 | 直流 – 200 kHz (-20dB) |
| 全功率下的頻率范圍 | 40 赫茲 - 25 赫茲 |
| Optimum Impedance | 4,0 歐姆 |
| 電流模式 | 是的 |
| 電壓模式 | 是的 |
| 相移 | 是的 |
| zui 大電壓 (RMS) | 45.0V |
| zui 大電流 (RMS) | 11.2A |
| zui 大電流 (DC) | 5A |
| 輸入電壓 (RMS) @1kHz 正弦,用于全振幅 | 2.5 伏 |
| 非線性諧波失真因子 | < 0.08 % |
| 噪音和嗡嗡聲 | > 110 分貝 |
| 尺寸 寬 x 高 x 深 (mm) | 482 x 88 x 290 |
| 重量 (kg) | 18 千克 |
| 保護電路 | 電流限制 溫度控制 斷電 |
Linear Power Amplifier BAA 500 BEAK – 2. Generation
The analog power amplifier BAA 500 BEAK V4 230V was developed for the control of vibration test systems with a maximum of 500 VA. The RMS output power is calcu- lated at a load impedance of 4 Ohm. The frequency of the power amplifier at voltage mode ranges from 40 Hz to 25 kHz at full power or with DC to 200 kHz with reduced power and minimum harmonic distortion. The device offers extremely stable operation within the specified temperature and voltage range and is therefore highly reliable. The analog power amplifier allows operation in both voltage and current mode. Its RMS output current limit is variable.
CONTACT
辦公地址:深圳市龍崗區南灣街道沙平北路111號TEL:0755-84532779
EMAIL:xue@hkmedqc.com
掃碼微信聯系